Save solar power for the evening peak: Growatt control in Home Assistant

I have installed Home Assistant in three properties: a year-round home and two summer houses. All three have solar panels and a Growatt hybrid inverter with a battery. I have therefore been working on controlling the inverters so that I avoid drawing power from the grid during the evening peak. … →

Philips Hue bulbs and wired Wall Switch Module via ZHA

It started with a handful of Philips Hue bulbs, simply because they run on Zigbee. I already had a Zigbee dongle running with Home Assistant’s built-in ZHA integration (Zigbee Home Automation) for other devices in the house, and Hue bulbs are among the most widely used Zigbee bulbs on the … →

Generating SmartIR codes with the help of AI

The Bosch heat pump (Bosch Climate 6101i) in one of our installations is controlled via a Broadlink IR hub and SmartIR in Home Assistant – no cloud, no official integration, just an IR hub that learns and re-transmits the same signals as the original remote control. The original setup is … →

Controlling an electric water heater with Home Assistant

The electric water heater in our summer house is a standard 110-liter Metro Therm type 644 with a 3 kW heating element. The summer house is insulated for year-round use and has a solar panel system. We use it often, including in winter. The starting point for an automation was … →

Comfort over kilowatts – my energy management with Home Assistant

By Per Frank-Hansen This article is based on a system description from May 2026. The author’s house, 190 m² over two floors plus a 110 m² basement, dates from 1950, and the system covers solar panels, battery, underfloor heating, and a Swedish property without solar panels. Purpose and principle The … →

Automatic frost protection of a root cellar with Home Assistant

It is often said that a root cellar is frost-proof. That is more of a rule of thumb than a reality – for seasonal variation in the soil itself to become minimal, you need to go down several metres. At 1 metre depth, the temperature still fluctuates with the seasons, … →

Maintenance charging of a Bosch PowerTube 500 with Home Assistant

A Bosch PowerTube 500 battery for an e-bike is a relatively expensive component, and after a previous battery was likely damaged by deep discharge following prolonged storage with too little charge during winter, the idea emerged to investigate how the battery could be maintained in a gentler and more automated … →

Zaptec Go 2 and solar charging in Home Assistant

The purpose of this installation has been to enable charging of an electric vehicle using surplus solar production controlled through Home Assistant without unnecessary import from the power grid. At another property I have previously used a similar solution with Zaptec Go, but this installation uses Zaptec Go 2, where … →